Loads and fixities

When I add fixities or loads they do not appear in subsequent increment blocks. Are they still there and how can I remove them?
This is a throwback from the CRISP 90 days. Loads and fixities only need to be put in, in the increment that they are applied in. They then remain in the analysis until either they are removed or the element/node they are applied to is removed.

Fixities can be released by selecting the edge that the fixity has been applied to, whilst in the increment in which you want to release the fixity is displayed. Select Fixities from the Increment menu and choose the fixity type you want to release (X, Y or Pore pressure) and then click on Release.

Loads are removed by applying a load of the same magnitude but opposite sign to the previously loaded edge/node whilst in the increment you wish to remove the load.